A Linear Time Invariant Continuous Time System Has Transfer Function

Signals and Systems – Transfer Function of Linear Time Invariant (LTI) System

---

The transfer function of a continuous-time LTI system may be defined using Laplace transform or Fourier transform. Also, the transfer function of the LTI system can only be defined under zero initial conditions. The block diagram of a continuous-time LTI system is shown in the following figure.

Transfer Function of LTI System in Frequency Domain

The transfer function 𝐻(𝜔) of an LTI system can be defined in one of the following ways −

• The transfer function of an LTI system is defined as the ratio of the Fourier transform of the output signal to the Fourier transform of the input signal provided that the initial conditions are zero.

• Or, the transfer function is defined as the ratio of output to input in frequency domain when the initial conditions are neglected.

• Or, the transfer function of the LTI system is the Fourier transform of its impulse response.

Mathematically, the transfer function of LTI system in frequency domain is defined as,

$$\mathrm{\mathit{H\left ( \omega \right )\mathrm{=}\frac{Y\left ( \omega \right )}{X\left ( \omega \right )} }}$$

The transfer function 𝐻(𝜔) is a complex quantity. Therefore, it has both magnitude and phase.

$$\mathrm{\mathit{H\left ( \omega \right )\mathrm{=}\left | H\left ( \omega \right ) \right |e^{j\theta \left ( \omega \right )} }}$$

The transfer function 𝐻(𝜔) in frequency domain is also known as frequency response of the LTI system. The frequency response of LTI system has magnitude response and the phase response, i.e.,

$$\mathrm{Magnitude\; response\; of\; LTI\; system \mathrm{=}\mathit{\left | H\left ( \omega \right ) \right | }}$$

$$\mathrm{Phase\; response\; of\; LTI\; system \mathrm{=}\mathit{\theta \left ( \omega \right )\mathrm{=}\angle H\left ( \omega \right ) }}$$

Since the frequency spectrum of the output is,

$$\mathrm{\mathit{Y \left ( \omega \right )\mathrm{=} H\left ( \omega \right )\cdot X\left ( \omega \right ) }}$$

Therefore,

$$\mathrm{Magnitude\:of\: output, \mathit{\left | Y \left ( \omega \right ) \right |\mathrm{=} \left | H\left ( \omega \right ) \right |\cdot \left | X\left ( \omega \right ) \right | }}$$

$$\mathrm{Phase\:of\: output, \mathit{\angle Y \left ( \omega \right )\mathrm{=} \angle H\left ( \omega \right )\mathrm{+} \angle X\left ( \omega \right ) }}$$

Also, the transfer function of the LTI system has conjugate symmetry property, i.e.,

$$\mathrm{\mathit{H\left ( -\omega \right )\mathrm{=}H^{*}\left ( \omega \right )}}$$

$$\mathrm{Magnitude,\mathit{\left | H\left ( -\omega \right ) \right |\mathrm{=}\left | H\left ( \omega \right ) \right |}}$$

And

$$\mathrm{Phase,\mathit{\angle H\left ( -\omega \right )\mathrm{=}-\angle H\left ( \omega \right )}}$$

The impulse response ℎ(𝑡) of the LTI system is the inverse Fourier transform of its transfer function 𝐻(𝜔), i.e.,

$$\mathrm{\mathit{h\left ( t \right )\mathrm{=}F^{-1}\left [ H\left ( \omega \right ) \right ]}}$$

Transfer Function of LTI System in s-Domain

The transfer function 𝐻(𝑠) of an LTI system in s-domain can be defined in one of the following ways −

• The transfer function of the LTI system can be defined as the ratio of the Laplace transform of the output signal to the Laplace transform of the input signal when the initial conditions are zero.

• Or, the transfer function is defined as the ratio of output to input in sdomain when the initial conditions are neglected.

• Or, the transfer function of the LTI system is the Laplace transform of its impulse response.

Mathematically, in Laplace domain or s-domain, the transfer function of LTI system is defined as,

$$\mathrm{\mathit{H\left ( s \right )\mathrm{=}\frac{Y\left ( s \right )}{X\left ( s \right )}}}$$

And, the impulse response ℎ(𝑡) of the LTI system in s-domain is the inverse Laplace transform of the transfer function 𝐻(𝑠), i.e.,

$$\mathrm{\mathit{h\left ( t \right )\mathrm{=}L^{-1}\left [ H\left ( s \right ) \right ]}}$$

Note – Once the transfer function of an LTI system in s-domain H(s) is known, then the transfer function in frequency domain 𝐻(𝜔) can be determined just by replacing s in 𝐻(𝑠) by 𝑗𝜔, i.e.,

$$\mathrm{\mathit{H\left ( \omega \right )\mathrm{=}H\left ( s \right )|_{s\mathrm{=}j\omega } }}$$

Updated on 17-Dec-2021 07:49:01

• Related Questions & Answers
• Signals and Systems – Response of Linear Time Invariant (LTI) System
• Signals and Systems – Properties of Linear Time-Invariant (LTI) Systems
• Signals and Systems: Linear Time-Invariant Systems
• Signals and Systems: Time Variant and Time-Invariant Systems
• Signals and Systems: Linear and Non-Linear Systems
• Signals and Systems – What is a Linear System?
• Signals and Systems – Symmetric Impulse Response of Linear-Phase System
• Signals and Systems – Filter Characteristics of Linear Systems
• Signals and Systems – Time Scaling of Signals
• Signals and Systems: Stable and Unstable System
• Signals and Systems: Static and Dynamic System
• Signals and Systems – Zero-Order Hold and its Transfer Function (Practical Reconstruction)
• Signals and Systems: Multiplication of Signals
• Signals and Systems: Classification of Systems
• Signals and Systems: Amplitude Scaling of Signals

biddlecombethonse.blogspot.com

Source: https://www.tutorialspoint.com/signals-and-systems-transfer-function-of-linear-time-invariant-lti-system

Share this post